INSUL ROLL STD

When the result must be flawless—choose NMC. This is European rubber for those who aren’t willing to pay extra later for someone else’s mistakes. The closed-cell structure turns the material into a natural vapor barrier: moisture doesn’t penetrate inside, and condensation, corrosion, and heat loss simply disappear from your list of problems. The main advantage of NMC is its consistency: uniform density and thickness in every meter of the roll, from the first batch to the last. Buy it once—and forget about insulation for decades. ALLTRADE is the largest distributor of NMC in Ukraine.

Brand	NMC
Country	Poland
Material	Foamed synthetic rubber (FEF, NBR-based)
Structure	Closed-cell
λ, W/(m·K)	≤ 0.036 (at 0 °C)
µ	7 500
Density, kg/m³	45–60
Working t°	−200 °C … +115 °C
Flammability	G1 — low flammability, self-extinguishing; B-s3,d0 (Class 0), EN 13501-1
Water Absorption	Minimum (closed cell)
Environmental Safety	Safe; asbestos-free, CFC/HCFC-free
Additional Properties	Oil and gasoline resistance: good; biostability: good; color: black; odor: neutral
Type	Thermal, sound, and vapor insulation
Roll width	1 m (the same for all thicknesses)
Thickness, mm	3, 6, 9, 13, 16, 19, 25, 32, 40, 50
Roll length	By thickness: 3 mm — 30 m · 6 mm — 20 m · 9 mm — 14 m · 13 mm — 10 m · 16 mm — 8 m · 19 mm — 6 m · 25 mm — 4 m · 32 mm — 3 m · 40 mm — 2.5 m · 50 mm — 2 m

Area = 1 m × length: 30 · 20 · 14 · 10 · 8 · 6 · 4 · 3 · 2.5 · 2 m² (by thickness). For the complete table, see the “Dimensions — Roll” sheet.

European quality and consistent geometry across the entire roll. Retains its shape and performance characteristics throughout its service life. Fully certified to European standards. A sensible choice for critical applications where the cost of error is high.

Uses

Utilities

Insulation for pipes, air ducts, and heating, ventilation, and air conditioning (HVAC) systems—retains heat and reduces heat loss by snugly fitting around components of any diameter.
Cold and protection against condensation

The sealed chamber acts as a vapor barrier: no condensation forms on cold pipes and mains, and the metal is protected from corrosion.
Walls and Floors

Thermal and acoustic insulation for walls, partitions, and floors; the flexible layer dampens noise and installs without creating thermal bridges.
Transportation and Equipment

Thermal and acoustic insulation for the interiors of automobiles, rail and water transport vehicles, engine compartments, and industrial equipment.