INSUL ROLL XT

European quality that can be installed in a matter of minutes. NMC roll rubber with a factory-applied self-adhesive layer—it’s as simple as “peel off the film, stick it on, and you’re done,” with no need for separate adhesive, no mess, and no downtime. The smooth adhesive layer adheres perfectly from the very first touch, and the reinforcing mesh underneath ensures that every seam is strong and durable. A premium result for those who value both the quality of the material and their own time. ALLTRADE is the largest distributor of NMC in Ukraine.

Brand	NMC
Country	Poland
Material	Foamed synthetic rubber (FEF, NBR-based)
Structure	Closed-cell
λ, W/(m·K)	≤ 0.036 (at 0 °C)
µ	7 500
Density, kg/m³	45–60
Working t°	−200 °C … +115 °C
Flammability	G1 — low flammability, self-extinguishing; B-s3,d0 (Class 0), EN 13501-1
Water Absorption	Minimum (closed cell)
Environmental Safety	Safe; asbestos-free, CFC/HCFC-free
Additional Properties	Oil and gasoline resistance: good; biostability: good; color: black; odor: neutral
Type	Thermal, sound, and vapor insulation
Roll width	1 m (the same for all thicknesses)
Thickness, mm	3, 6, 9, 13, 16, 19, 25, 32, 40, 50
Roll length	By thickness: 3 mm — 30 m · 6 mm — 20 m · 9 mm — 14 m · 13 mm — 10 m · 16 mm — 8 m · 19 mm — 6 m · 25 mm — 4 m · 32 mm — 3 m · 40 mm — 2.5 m · 50 mm — 2 m

Area = 1 m × length: 30 · 20 · 14 · 10 · 8 · 6 · 4 · 3 · 2.5 · 2 m² (by thickness). For the complete table, see the “Dimensions — Roll” sheet.

European quality + installation without separate adhesive. Reinforcing mesh under the adhesive for a strong joint. Consistent adhesion and geometry. Saves time on-site without compromising quality.

Uses

Utilities

Insulation for pipes, air ducts, and heating, ventilation, and air conditioning (HVAC) systems—retains heat and reduces heat loss by snugly fitting around components of any diameter.
Cold and protection against condensation

The sealed chamber acts as a vapor barrier: no condensation forms on cold pipes and mains, and the metal is protected from corrosion.
Walls and Floors

Thermal and acoustic insulation for walls, partitions, and floors; the flexible layer dampens noise and installs without creating thermal bridges.
Transportation and Equipment

Thermal and acoustic insulation for the interiors of automobiles, rail and water transport vehicles, engine compartments, and industrial equipment.