NMC INSUL TUBE COIL

Insul Coil — kilometers of insulation without a single unnecessary joint. This is premium NMC pipe rubber in a coil format: one continuous tube instead of dozens of separate sections. Fewer joints mean fewer cold bridges, less waste, and a noticeably neater result on long pipelines. All the quality features of NMC rubber—closed-cell structure, stable geometry, and low thermal conductivity—are now available in a format that saves you time. ALLTRADE is the largest distributor of NMC in Ukraine.

Brand	NMC
Country	Poland
Material	Foamed synthetic rubber (FEF, NBR-based)
Structure	Closed-cell
λ, W/(m·K)	≤ 0.036 (at 0 °C)
µ	7 500
Density, kg/m³	45–60
Working t°	−200 °C … +115 °C
Flammability	G1 — low flammability, self-extinguishing; B-s3,d0 (Class 0), EN 13501-1
Water Absorption	Minimum (closed cell)
Environmental Safety	Safe; asbestos-free, CFC/HCFC-free
Additional Properties	Oil and gasoline resistance: good; biostability: good; color: black; odor: neutral
Type	Thermal, sound, and vapor insulation
Inner Ø	6–114 mm
Wall thickness, mm	6, 9, 13, 19, 25, 32
Outer Ø	Inner Ø + 2× wall thickness — see the “Dimensions — Pipe” sheet

Coil (continuous) — length to be specified

Continuous pipe in a coil: installation of long runs without joints. Fewer joints mean less heat loss and a neater appearance. European NMC quality and consistent geometry. Minimal waste during installation.

Uses

Long highways

Insulation for long heating, water supply, and air conditioning lines without joints—the roll is unrolled along the entire route.
Cold and protection against condensation

Continuous insulation leaves no exposed areas where condensation could form on cold pipes.
Concealed and floor-mounted installation

Convenient for laying long runs on the floor and in concealed routes where the continuity of the layer is important.